PC-70 Copper Red - Pint C-3 Dry Raku Glaze Mixing Instructions

Dry Raku Glaze Mixing Instructions Establishing the correct water to dry material ratio in Raku glazes can be challenging

Ideal for throwing

Using 2-3 coats

and other ware

Thin with water and AMACO Gum Solution if needed

PC-70 Copper Red - Pint C-3 Dry Raku Glaze Mixing InstructionsCopper Red is an oxblood red that gives the same results in oxidation as a traditional reduction copper glaze. Copper Red breaks clear on edges or where thin. Directions: Shake well before use. For best results do not thin the glaze and apply 3 4 brush coats to Cone 04 bisque. (Let the glaze dry between coats). Glaze may run. More dramatic results at Cone 6. Lead Free Food Safe Brushable. Safety Warning Tableware producers must test all finished ware