Johnny Joint Rod End 2 1/2 Inch Weld-On 2.368 Inch X 0.625 Inch Ball Externally Greased Each RockJock 4x4 Winch & Recovery - Recovery & Offroad - Traction Board Cycles Minimum: 10

Cycles Minimum: 10

Everything from hardware to brackets was right there

RIGIDs Scene lights are also available with a durable white finish

Other models are available as well

The Pro 600 (Capacitive Discharge Ignition) coil is the solution with the highest current and voltage available in a small compact design

Johnny Joint Rod End 2 1/2 Inch Weld-On 2.368 Inch X 0.625 Inch Ball Externally Greased Each RockJock 4x4 Winch & Recovery - Recovery & Offroad - Traction Board Cycles Minimum: 10RockJock's weld on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy duty,