1/4 Inch Drive x 5.5 mm Deep 12-Point Socket BoltsandNuts.com Part Number: BIT-DMS73-5009

Part Number: BIT-DMS73-5009

3 times the ANSI/ASME standard for proof torque • Twist-to-lock socket rail organizes and securely holds socket in place—both for in your toolbox and on the go

• Precise E-Star Geometry – The internal six-lobe geometry is designed for a high-torque fit that resists slipping • Made from Cr-V Steel – The chromium-vanadium socket is heat-treated to 40–47 HRC for use on impact wrenches • Corrosion-Resistant – The socket is coated with a manganese phosphate finish to resist corrosion • Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off • Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types

The tip of the pick comes to a sharp 30-degree tapered point to keep the strength as close to the tip as possible

Part Number DWC5-530-351

1/4 Inch Drive x 5.5 mm Deep 12-Point Socket BoltsandNuts.com Part Number: BIT-DMS73-5009Deep 12 point opening fits double hex (12 sided), hex, and square shaped fasteners Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round off Deep length sockets reach into wells and accommodate the excess threads of longer shafts Extra large die stamped size markings are easy to read and cant wear off Polished, chrome plated finish easily wipes clean and is highly resistant to corrosion Four detent