1/8 Inch Flat End Hex L-Key BoltsandNuts.com The hammer has two flat

The hammer has two flat striking faces that are made of 4140 chromium-molybdenum steel heat-treated to 52 HRC

resulting in a higher performing tool than one-piece designs • Permanent Connection – The bit is pressed directly into the socket for a permanent connection that won't loosen over time or under stress • Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off • Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types • Socket Rail – The twist-to-lock clips on the rail hold sockets securely and can be repositioned anywhere along the rail

• Strong Bar Stock – The pry bar shafts are made from 3/8–5/8 inch (depending on the pry bar length) solid steel that's heat-treated to maintain strength and toughness • Angled for Prying and Positioning – Slide in between materials or under objects with the pry bar's chisel tip

Coarse/Fine Thread:

1/4 Inch Shank: T10 x T15 • One compact and versatile tool gives you access to 2 screwdriver sizes and 1 nut driver size • Chrome-plated steel tube serves as both a 1/4 inch nut driver and a screwdriver bit holder • Extremely durable handle made of glass-reinforced nylon and molded in the USA • Fluted sides provide a natural grip for your fingers • Bit tips are milled 21 mm down the shank

1/8 Inch Flat End Hex L-Key BoltsandNuts.com The hammer has two flatTight Fit with Fasteners In order to create a reliable, tight fit with fasteners, our L keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards Two Measures of Tolerance Control We measure our hex key tolerances from point to point and side to side to ensure the highest standards of dimensional accuracy and consistency 8660 Steel We make our L keys with 8660 nickel chromium molybdenum steel that's