CRL Stainless 32 Degree Upper Incline Corner for 2-1/2" Diameter Railing Oversize Shipping Drilled and Tapped for 3/8"-16

Drilled and Tapped for 3/8"-16 Fastener

Install Using Loctite Epoxy LT1324007

Includes S712 S-Series Square Clamps for 1/2”-9/16” Glass

CRL's EGR Aluminum Stanchion Covers are design to sleeve over the embedded Stainless Steel Stanchions before the Base Shoe is installed

Works With GRWB1

CRL Stainless 32 Degree Upper Incline Corner for 2-1/2" Diameter Railing Oversize Shipping Drilled and Tapped for 3/8"-16Four Standard Angles for the Top of a Stair or Ramp Railing Incline Brushed or Polished Stainless Finishes in Six Diameters CRL Interior slip fit Upper Incline Corners for 1 2" (12 mm) or 5 8" (16 mm) thick glass allow for hairline joint assemblies with straight lengths of CRL Cap Rail. Use our Cat. No. 32629 Metal Contact Cement to achieve a secure and permanent bond. Two Connector Sleeves are required for the use of each corner. Each Incline Corner