Restored Pioneer SX1250 Receiver tubes I ran the AUX input

I ran the AUX input with my DAC and tested the in input with various amounts of gain to judge it's ability to pickup weak signal strength

There are pieces of packing material behind the faceplate that can be seen in the photos

All the electrolytic capacitors were replaced along with the 2 main filter caps

I began this project by cleaning all the switches

The push button selectors were painstakingly cleaned and tested while the receiver was apart for the new capacitors

Restored Pioneer SX1250 Receiver tubes I ran the AUX inputThis Pioneer SX1250 has been completed restored. All electrolytic capacitors have been replaced along with the small signal transistors throughout the preamp and amplifier sections. The controls have been cleaned properly and the receiver was fully detailed while it was apart. The chassis is excellent condition. No signs of rust or corrosion. Likewise, the black heat sinks only show minimal signs of wear and no signs of misuse. The faceplate is in