Air-Assisted Spray Applicator System toolssharps Humidity is over 80%

Humidity is over 80%

If heat curing

keep finished projects out of direct sunlight to prevent yellowing or warping

let the kiln wash dry and apply additional coats until the thickness is about 1/16"

Wall Concentration Ready-to-use TDS

Air-Assisted Spray Applicator System toolssharps Humidity is over 80%The Air Assisted Spray Applicator works with the simple squeeze of a trigger. The steady stream of fiber allows you to easily apply an even coating with just one hand. Designed to be used with an air compressor at 15 to 18 lbs. psi. The residual fibers in the canister can be cleaned between colors with a vacuum. 1 qt. metal canister included. #976 Additional 1 qt. canister for the Air Assisted Spray Applicator. Useful when working with multiple colors